Shower

Turn the dial inside the shower inside the cover to max 15 minutes.  Then depress the button on the shower head and it will flow.  The shower on demand water heater will automatically ignite. 

There is a summer and a winter setting noted by a snow flake and sun.  Winter is a lot hotter and at max temperature will SCALD you! Use winter setting only when cold temperatures i.e the morning

Temperature adjust - noted by the label and flame

When summer setting selected - I like to have it set at 2/3 to 3/4 from full heat with the temp adjust

When Winter setting selected  - We do not go higher than half way with temp adjust - will be very hot and can scald you!

The water droplet symbol is water flow - just leave at full

Diesel Heater

This is for those colder mornings

You will notice the small black remote to the right as you walk in 

I like to start it before I shower for about 5-10 minutes to let the room warm up.  

To start

• Tap any button and the small screen will illuminate

• Hold the power button for 2 seconds for the heat to start.  You will see SG:06 appear and heat at the top and that means it is on at its full heat 

• Heat will be coming out of the black vent by the base of the shower

To turn off - THIS IS CRITICAL

• When shower is completed - tap any button if screen is not on

• Hold power button for 2 seconds until you see it say OFF and at the top says cool - the fan will be blowing to cool off the heater but it will automatically shut off once the remote screen says off.